Tunnel and shaft construction workers in New South Wales are now covered by a new legally binding safety code designed to strengthen protection against respirable crystalline silica and other hazards associated with modern underground construction.
The Tunnels and Shafts Code of Practice came into force in August 2026, replacing the Tunnels Under Construction Code of Practice that had been in place since 2006. The updated framework reflects current tunnelling and excavation methods while placing greater emphasis on ventilation, airborne contaminant control, exposure monitoring and worker health.

Respirable crystalline silica is a particular concern in tunnelling because silica-containing rock can generate extremely fine dust during excavation, drilling, cutting, crushing and material handling. Prolonged inhalation can lead to silicosis, an irreversible occupational lung disease.
The new code responds to recommendations from the NSW Parliamentary 2024 Review of the Dust Diseases Scheme, which called for stronger protections for workers exposed to silica during tunnelling, and was developed in consultation with tunnelling health and safety experts, industry representatives, unions and other stakeholders. It sets the minimum standards businesses must comply with or risk breaching the Work Health and Safety Act, which can carry significant penalties, and provides updated guidance on risk assessment, engineering controls, ventilation design, air monitoring and the ongoing review of exposure control measures.
It also reflects the changing nature of underground construction. Modern tunnel boring machines, mechanised excavation techniques and increasingly complex work environments introduce different risks from those considered when the previous code was developed two decades ago. Work Health and Safety Minister Sophie Cotsis said this was the first time in 20 years the tunnelling code had been updated, and that it now constitutes a legally enforceable minimum standard.
Ventilation remains one of the most important engineering controls in underground works. Effective systems must continuously remove contaminated air and provide sufficient fresh airflow to working areas, particularly around excavation faces, spoil handling systems and other locations where dust is generated.
Air monitoring is equally important because silica concentrations cannot be reliably assessed visually. Monitoring data allow project teams to determine whether existing controls are effective and whether additional measures are required as excavation conditions, equipment or working methods change.
The code also expands beyond traditional physical hazards by recognising psychosocial risks associated with tunnelling, including remote and isolated working environments.
Recent inspections indicate that enforcement has already begun. A statewide compliance operation conducted between late September and early November covered three tunnel projects and resulted in five improvement notices. Inspectors reported a strong awareness of the new code, with contractors proactively conducting gap analyses to align existing health and safety systems with the new requirements.
The tunnel-specific rules form part of a broader effort to reduce occupational silica exposure across New South Wales. Since 1 July 2024, SafeWork NSW inspectors have carried out 4,156 silica-related workplace visits across multiple industries, issuing 2,063 improvement notices, 520 prohibition notices and 73 penalty notices. The wider programme also includes a Tunnelling Dust Safety Taskforce, a dedicated silica unit within SafeWork NSW, A$5 million for silicosis research and patient support, a A$2.5 million mobile screening Lung Bus, and a Silica Worker Register that held 20,004 workers from 922 businesses as at 30 September.
For major underground infrastructure projects, the updated code places greater responsibility on project teams to demonstrate that dust risks are being actively controlled rather than addressed only through personal protective equipment. Ventilation, dust suppression, isolation, monitoring and changes to work methods are expected to form the primary layers of protection.
As tunnelling activity continues across major transport and infrastructure programmes, the new framework establishes a more contemporary baseline for managing both immediate underground construction hazards and long-term occupational health risks. SafeWork Commissioner Janet Schorer described the code as one part of a broader approach to tackling silicosis, and encouraged businesses, workers and other duty holders involved in tunnel and shaft construction to familiarise themselves with its guidance.
The following video discusses tunnel workers being exposed to toxic levels of silica dust far exceeding safe limits.
Sources: tunnelsandtunnelling.com, nsw.gov.au
A new study presents the first quantitative stress magnitude map that also includes horizontal stre...
Theoretical models to predict the capacity of helical piles are based on Soil Mechanics and an appr...
A well-known engineering challenge in the framework of finite element (FE) analysis-based design is...
In the early hours of September 26, emergency efforts to stabilize the massive sinkhole in front of...
The United Kingdom is advancing geothermal energy development through a combination of deep geotherm...
Helical piles are a proven deep foundation solution used across commercial, industrial, utility, and...
Block caving is a new alternative method of developing new mines or extending the operation of open...
The foundation of a building is constructed in order to transfer the superstructure's load to the g...
Maharashtra's longest road tunnel between Igatpuri and Kasara is nearing completion. It is built as...